Is this subtitle correct?

# How to Make a Pattern for a Salwar: 1/2

983 visualizações
Back to the program
##### Carregando...

In this video you will learn how to make a pattern for Salwar pants.

The Salwar is a traditional indian variety of light, pleated trousers, commonly worn with a Kameez or shirt.

They are made loose along the legs, tapering to a tight fit around the ankles.

To make a pattern, you will need: A pattern sheet Markers in 3 different colours A ruler A measuring tape And a pair of scissors

Lay the pattern sheet flat on the table.

Remember that fabric is often cut ‘on fold’, as in this case, to achieve symmetry.

The pattern will therefore contain just one half of the pants.

Keep in mind that the measurements used here are for a small-sized adult.

If you want to adapt the garment to your own size, you will need the following measurements.

The waist circumference The hip circumference The crotch depth The Crotch Length The outseam The Inseam .

We shall start by marking the points that will guide the basic structure of the Salwar.

Plot out the following points, as illustrated.

Mark point B, 34 inches along the longer edge from point A, which is at the top corner.

AB = 34 inches

AB represents the length of the Salwar up to the waistband, which will be made separately.

Now, mark point C, 8 inches from A, towards B.

AC = 8 inches

Next, plot out the points perpendicular to the longer edge.

Mark point D, 15.5 inches from A.

Now, mark point E, 17.5 inches from C.

CE = 17.5 inches

CE represents the hip line.

Mark point F, 6.5 inches from point B.

BF = 6.5 inches

Mark a point G, 2 inches from E, towards C.

EG = 2 inches

Now, draw a line from C to E.

Draw a line connecting D to G.

Draw a line from F to B.

We shall now draw arcs that define the crotch seam and inseam lines of the Salwar.

Start drawing a dotted arc from G to E, as shown.

You may connect the dotted line.

Once this is done, draw another arc from E to F.

Draw a line connecting these dots as well.

We shall now define the hem allowance around the leg hole.

Mark a point H, 2 inches below B and another point I, 2 inches below F.

BH = FI = 2 inches.

Connect the points BF and HI.

We shall now mark the seam allowance along the inseam and crotch seam lines.

Using a different coloured marker, mark a series of equally-spaced out points half an inch outside the crotch seam and inseam lines.

Join all the marked points with a dotted line.

Shade the seam allowance with the same colour.

Now, using a third colour, shade the hem allowance, as shown.

You may now start cutting the pattern along the outline.

Follow the curves of the seams with care.

To avoid confusion, you may write the name of the garment on the pattern.

You may also mark the side which will be laid on the fold of the fabric.

You have now learned how to cut the pattern for a Salwar.

Watch the remaining videos and finish your garment.